We tried the Tanabe NF210 Springs on the AWD Juke and it didn't work out. The springs made the car sit higher in the front than the rear. We'll have to try this one again. 

We did try the springs on a FWD Model successfully. The car had a nice stance after the springs were installed. Check out the pics!

Here's the Nissan Juke (FWD) stock height

Here's the Juke on Tanabe NF210 springs

We fitted some Tanabe NF210 springs on an AWD Nissan Juke. Let's take a look at the stock height first.

Unfortunately the springs didn't work out. The ride height in the rear is very low and the car sits too high in the front.  Pictures coming soon.

As an added bonus, we've tested the Concept G exhaust for the Juke... Although confirmed fit in Japan, the US version wasn't so lucky.

We found out that the flange did not exactly match the U.S version. But that didn't stop us from fitting it... This IS our R&D after all and we had to modify the exhaust's flange to fit the US flange.

Test fitting...

And the final verdict...

At this moment we have no words on if the exhaust will be released or not... But one thing is that the exhaust fits the car very well!

Tanabe Tower Bar for the Nissan Juke is a go! Awesome fitments and no problem!

Examining under the car to see if the Under brace will fit...

And here is the under brace installed on the car... Fitment is good!