After successfully testfitting the Medalion Touring Exhaust, it was time to move on to the Concept G.

First, the R&D Team took a few measurements using a caliper gauge. Then, they went ahead and installed the exhaust.

For exhaust testing, we aim to do fitment tests for the Medalion Touring and Concept G systems. First on the list is the Medalion Touring Exhaust.

As seen above, the Medalion Touring Exhaust for the 2010 Prius features an oval canister with a double-wall tip for reduced sound resonation. Fitment test was successful.

Since the car was already on the lift, it was a good chance for measuring the stock suspension parts prior to the spring tests.

Here are the NF210 Springs that are to be tested on the Prius.

As you can see, this NF210 is a linear-rate spring.

Below, you can see the new Sustec Tower Bar that's to be test-fitted.

The endplates are high-quality, high-rigidity pieces.

Next is the Medalion Touring Exhaust System.

... followed by the Concept G Exhaust System

The Sustec Under Brace is a 2-Point bar that braces the transmission tunnel.

Next, the stock exhaust was measured.